MAJOR FEATURES

  • WILL BE AVAILABLE IN SEVERAL MODELS

The Cleancut 6500DT2 Prototype model (Deutz Tier 2 diesel motor) is currently available for demonstration and testing at TRAXX, Melbourne, Victoria.

The Cleancut 6000H4 (Hatz Tier 4 diesel motor) should be at TRAXX in Melbourne by the end of July 2020.

Two additional models, the CC6000D2 & the CC6500H2 are also available for sale.

The Cleancut 7500HT4 will be redesigned and ready for market by 2022 depending on Industry feedback and sales of the other models.

  • THE CLEANCUT 6000H4, 6500H2 & 6000D2 MODELS CAN TAKE UP TO  A  44" BLADE  WITH CLEARANCE FOR TURNING.

  • LIFTING ADVANTAGE

  • Handles remain level at all times.

  • Due to its Patented Design, the Centre of Gravity on the Cleancut Saws moves vertically when lifted ensuring ease of manoeuvrability.

  • Existing saws require the operator to lift 70kg to 135kg with a twisting motion when large blades are used.

  • This is outside lifting index guidelines (3.0) and exposes the contractor to possible litigation.

  • The Cleancut Saws in nearly all normal operations do not exceed a legal lifting index of 2.5 or 30kgs.

Lifting the CC6000HT4 with a 40inch blad
  • 100% CLEAN UP

Clean Up labour is NOT  required in most situations.

 

The patented Slurry Recycling Guard recycles water & Slurry during the cutting process enabling up to 100% clean up from a remote vacuum system as you cut. 

Cleancut Floor Saw clean up system
  • FLOW METER & TAP

All Cleancut Saws are fitted with a water flow meter and tap.  This enables the Operator to adjust the water flow to the blade to suit the cutting surface to provide sufficient water flow while eliminating Airborne Exposure (dusting).

  • REDUCED BLADE VIBRATION

The use of Hydraulics on all Cleancut Saws enables damping of motor vibration which is not possible with the belt driven road saws that are currently on the market.

Anti vibration mounts
  • TIGER EYE POINTER SYSTEM

No more cumbersome Pointers. 

 

The working length of the Cleancut Saw is shorter than other saws on the market.

In many cases no line needs to be marked out.  Simply align with a distant mark.  

  • 6 WHEEL DRIVE

This feature enables long lasting polyurethane wheels to be used and eliminates slipping .  

This feature will enable the Cleancut Road Saws to travel over surfaces that are inaccessible to current Saws, such as curbing and grass.

  • BLADE SPEED/GEAR CHANGE WHILE CUTTING

  • EASY TO REMOVE PANELS FOR MAINTENANCE

Good access to all interior body parts for maintenance by simply removing the outer panels.

The use of hydraulics enables these Saws to offer incremental gear/blade speed changes.  These changes can be made while cutting and enables cutting speed and blade life to be maximised.

© Cleancut Construction Products